A fire pit is a great addition to your backyard, transforming the outdoor area into a cosy and inviting space.
  by /0 comments

Build a fire pit in 6 simple steps

Building a fire pit in your backyard is a simple DIY job you can do on the weekend that will bring endless hours of year-round enjoyment. If you love entertaining outdoors, star-gazing on a cool night, or roasting marshmallows with the kids, then the flickering flames of a fire pit will create both a focal point and design feature.

“Essentially, a fire pit is the new water feature; it’s a great addition to the backyard, transforming the outdoor area into a cosy and inviting space,” explains landscape expert and Adbri Masonry brand ambassador, Jason Hodges.

“The ambience a fire pit brings is worth the investment alone, providing an enjoyable feature for the garden and a natural gathering spot for socialising and entertaining. I like to describe it as nature’s TV and people are naturally drawn to the campfire-like atmosphere.”

You can build a fire pit pretty much out of anything – a 44-gallon drum cut in half, a washing machine tub or one made of old house bricks – but here Jason shows how to construct one from basic Adbri courtyard blocks.


Step 1: Excavation

After you determine the location of your fire pit, you will need to excavate the area. Lay the first course of Adbri AB Courtyard York blocks so you can mark the location of where the blocks will be. Remove the blocks and dig a level trench 75mm deep and 178mm wide or excavate the full circle.


Step 2: Creating the foundation

Fill the trench with a weak mix of sand and cement, about 6:1 (six parts sand and one part cement). Take your time to ensure the foundation is level. Place 4 x AB Courtyard blocks at the cross points of the circle and use a straight 2×4 and a level to check the entire trench is level. Make adjustments by adding or removing the sand and cement screed.


Step 3: Laying the first course

Place the base course of blocks on the foundation pad, check the levelling each time a few blocks are laid to ensure that they are all level from front to back and side to side before placing the next block. This will ensure a level base course.


Step 4: Second course

Stack the next course of blocks, making adjustments as necessary. Once installed, remove sod or vegetation from the centre of the fire pit area. Lay roughly 6 x 23-kg bags of clean rock within the circle to cover the bottom of the fire pit. Then using a shovel, rake smooth.


Step 5: Finish with wall caps

Place AB Courtyard Caps on top of the fire pit, securing them with a tube of masonry adhesive.


Step 6: Finishing touches

Install decorative rock to line the interior of the pit. Place a steel bowl or metal fire ring in the centre to contain the flames and get the marshmallows ready.

Watch the full DIY instructional video here:

Share this article

Veda Dante

Veda Dante is an accomplished journalist, consultant and content creator who has nearly 30 years’ experience writing about everything from tourism, hospitality and health to architecture, pools and luxury goods. When she’s not producing copy for clients, this self-confessed word nerd is usually writing and photographing the Byron Bay region for her blog

The opinions expressed in this article are the opinions of the author(s) and not necessarily those of Homeloans Ltd.